infra-agent-skills

← All skillsNetwork

Itential Builder

MOP Pre- and Post-Checks

itential-mop

Build command templates with validation rules, run CLI checks against devices, and use analytic templates for pre/post comparison.

About this skill

Build command templates with validation rules, run CLI checks against devices, and use analytic templates for pre/post comparison. Use when building pre-checks, post-checks, or compliance validations that run show commands and evaluate output.

Instructions

MOP (Method of Procedure) - Developer Skills Guide

MOP manages command templates and analytic templates for running CLI commands against network devices with validation rules. Command templates execute show commands and evaluate the output against rules. Analytic templates compare command output before and after a change.

MOP is for read-only validation only – never use it to push configuration to devices. Use Jinja2 templates and workflow tasks for config changes — see /itential-devices (Template Designer) or the environment’s native config-push task (assets/AGENTS.md Rule 25).

Customization

Before using this skill, check custom/org/, custom/team/ and custom/dev/ in this skill’s own folder. Read every .md file found — any folder may be empty or absent. Apply them on top of everything below; where a file overrides a specific rule here, follow the override. More specific wins: dev > team > org > this document. No customization may weaken this skill’s safety rules or put credentials in committed files.

Bundled files: paths in this skill that start with assets/ or scripts/ are relative to this skill’s own folder. When you read one, or pass one to a shell command (which runs from the user’s working folder), use this skill’s folder + that relative path — e.g. <this skill's folder>/assets/helpers/create/create-workflow.json.

Concepts

  • Command template = a set of CLI commands + validation rules, run against one or more devices
  • Analytic template = pre/post comparison of command output to detect drift
  • Variable syntax = <!variable_name!> in both commands and rules (NOT {{ var }} or $var)
  • Pass/fail logic = hierarchical: template-level -> command-level -> rule-level, each with AND/OR control

API Reference

All /mop/* endpoints:

Method Endpoint Description
POST /mop/createTemplate Create a command template
GET /mop/listTemplates List all command templates
GET /mop/listATemplate/{name} Get a command template by name
POST /mop/updateTemplate/{mopID} Update a command template (full replacement)
POST /mop/deleteTemplate/{id} Delete a command template
POST /mop/exportTemplate Export template (body: {"_id": "..."} or {"name": "..."})
POST /mop/importTemplate Import a template
POST /mop/RunCommandTemplate Run a command template against devices
POST /mop/RunCommand Run a single ad-hoc command on one device (workflow task)
POST /mop/RunCommandDevices Run a single ad-hoc command on multiple devices
POST /mop/RunCommandTemplateSingleCommand Run one command from a template by index
POST /mop/GetBootFlash Get boot flash image name from a device
POST /mop/reattempt Retry/delay mechanism for workflows
POST /mop/createAnalyticTemplate Create an analytic template
GET /mop/listAnalyticTemplates List all analytic templates
GET /mop/listAnAnalyticTemplate/{name} Get an analytic template by name (path param)
POST /mop/updateAnalyticTemplate/{id} Update an analytic template
POST /mop/deleteAnalyticTemplate/{id} Delete an analytic template
POST /mop/runAnalyticsTemplate Run an analytic template (workflow task)

Template Structure

Create with POST /mop/createTemplate. The body uses a {"mop": {...}} wrapper.

{
  "mop": {
    "name": "Port_Turn_Up_Pre_Check",
    "description": "Validates interface and VLAN before port turn-up",
    "os": "",
    "passRule": true,
    "ignoreWarnings": false,
    "commands": [
      {
        "command": "show interface <!interface!>",
        "passRule": true,
        "rules": [
          {
            "rule": "line protocol is",
            "eval": "contains",
            "severity": "error"
          }
        ]
      },
      {
        "command": "show vlan brief",
        "passRule": true,
        "rules": [
          {
            "rule": "<!vlan_id!>",
            "eval": "contains",
            "severity": "error",
          }
        ]
      }
    ]
  }
}

Field reference:

  • name – template name (required, must be unique)
  • description – human-readable description
  • os – target OS filter (empty string = any OS)
  • passRule (template-level) – true = ALL commands must pass (AND), false = ONE command must pass (OR)
  • ignoreWarnings – see ignoreWarnings section below
  • commands[] – array of commands to execute
    • command – the CLI command string. Variables use <!variable_name!> syntax
    • passRule (command-level) – true = ALL rules must pass (AND), false = ONE rule must pass (OR)
    • rules[] – validation rules applied to the command output
      • rule – the string or pattern to match against. Can contain <!variables!>
      • eval – evaluation operator (case-sensitive, see Rule Evaluation below)
      • severity – "error", "warning", or "info"
      • flags – optional evaluation flags (see Flags below)

Only “name” is required – template validation uses AJV with strict=false, so minimal templates are accepted.

passRule Logic

  • Template-level passRule: true = ALL commands must pass (AND logic)
  • Template-level passRule: false = at least ONE command must pass (OR logic)
  • Command-level passRule: true = ALL rules in this command must pass (AND logic)
  • Command-level passRule: false = at least ONE rule must pass (OR logic)

ignoreWarnings

Template-level field, default false. When true: only rules with severity: "error" count as real failures. Rules with severity: "warning" or "info" that fail are treated as passing. When false (default): all severity levels count.

{
  "mop": {
    "name": "...",
    "passRule": true,
    "ignoreWarnings": true,
    "commands": [...]
  }
}

Rule Evaluation

The eval field determines how rule matching works. Eval types are case-sensitive.

Eval Purpose Example Rule
contains String exists in output "line protocol is"
!contains String does NOT exist in output "ERROR"
contains1 String exists exactly once "Active"
RegEx Regex matches output (capital R and E!) "/\\d+\\.\\d+/"
!RegEx Regex does NOT match "/ERROR/"
#comparison Extract + compare two values See details below

Flags

Optional flags object on each rule:

  • case: true = case-INSENSITIVE matching (confusing name – case: true does NOT mean case-sensitive)
  • global: true = global search (RegEx only)
  • multiline: true = ^/$ match start/end of lines, not just start/end of string (RegEx only)

case is available for all eval types. global and multiline are only meaningful for RegEx and !RegEx.

#comparison Details

Extract two values from command output using regex, then compare numerically.

{
  "rule": "/Available: (\\d+)/",
  "ruleB": "/Total: (\\d+)/",
  "eval": "#comparison",
  "evaluator": ">=",
  "severity": "error"
}
  • rule / ruleB – regex patterns (in /pattern/ format) to extract values from the command output
  • evaluator – comparison operator: =, !=, <, >, <=, >=, %
  • % operator – passes if ruleB/rule * 100 <= percentage. Set "percentage": 80 to pass if ruleB is at most 80% of rule.

Example with percentage:

{
  "rule": "/Total: (\\d+)/",
  "ruleB": "/Used: (\\d+)/",
  "eval": "#comparison",
  "evaluator": "%",
  "percentage": 80,
  "severity": "error"
}

Variable Substitution

  • Syntax: <!variable_name!> in both commands and rules
  • Variables are substituted BEFORE execution
  • If a variable is missing, the command is SKIPPED (not failed!) and counts as PASSED
  • This syntax is different from Jinja2 templates ({{ var }}) and workflow variable references ($var.job.x)

Example command with variables:

{
  "command": "show running-config interface <!interface!>",
  "passRule": true,
  "rules": [
    {
      "rule": "switchport access vlan <!vlan_id!>",
      "eval": "contains",
      "severity": "error",
      "evaluation": "pass"
    }
  ]
}

Execution

Standalone (without a workflow)

POST /mop/RunCommandTemplate
{
  "template": "Port_Turn_Up_Pre_Check",
  "variables": {
    "interface": "GigabitEthernet0/1",
    "vlan_id": "100"
  },
  "devices": ["IOS-CAT8KV-1"]
}
  • template – template name (string)
  • variables – object with values for <!variable!> substitutions
  • devices – array of device names (or single device name string)

In a Workflow

Use the MOP.RunCommandTemplate task. See /builder-agent for full workflow task wiring patterns.

{
  "incoming": {
    "template": "$var.job.templateName",
    "variables": "$var.job.templateVariables",
    "devices": "$var.job.devices"
  },
  "outgoing": {
    "mop_template_results": null
  }
}
  • template – name of the command template (string or $var reference)
  • variables – object with values for <!variable!> substitutions
  • devices – array of device names to run against

See /builder-agent for running the workflow via POST /operations-manager/jobs/start.

Ad-Hoc Commands (without a template)

Run a single command directly without creating a template first:

POST /mop/RunCommand
{
  "command": "show version",
  "variables": {},
  "device": "IOS-CAT8KV-1"
}

Returns: {raw, evaluated, device, response, result} — same shape as one entry in commands_results.

For multiple devices: POST /mop/RunCommandDevices with "devices": ["dev1", "dev2"] (array instead of singular device).

To run a single command from an existing template by index: POST /mop/RunCommandTemplateSingleCommand with {"templateId": "name", "commandIndex": 0, "variables": {}, "devices": ["dev1"]}.

Response Shape

{
  "all_pass_flag": true,
  "result": true,
  "name": "Port_Turn_Up_Pre_Check",
  "commands_results": [
    {
      "raw": "show interface <!interface!>",
      "evaluated": "show interface GigabitEthernet0/1",
      "all_pass_flag": true,
      "device": "IOS-CAT8KV-1",
      "response": "...command output...",
      "result": true,
      "parameters": {"interface": "GigabitEthernet0/1"},
      "rules": [
        {"rule": "line protocol is", "eval": "contains", "result": true, "severity": "error"}
      ]
    }
  ]
}
  • result (top-level) – overall template pass/fail (boolean)
  • all_pass_flag (top-level) – the template’s passRule setting
  • commands_results[] – one entry per command per device
    • raw – original command string (before variable substitution)
    • evaluated – command with variables substituted
    • response – raw device output
    • result – whether this command passed (boolean)
    • all_pass_flag – this command’s passRule setting
    • device – the device this command ran against
    • parameters – the variables that were substituted
    • rules[].result – true/false for each individual rule

Update

POST /mop/updateTemplate/{mopID}

The mopID is the template name (URL-encoded). Uses the same {"mop": {...}} body wrapper as create. The body is a full replacement – include ALL fields, not just changed ones.

Response on success:

{
  "n": 1,
  "ok": 1,
  "nModified": 1
}

Analytic Templates

Analytic templates compare command output before and after a change to detect drift or validate results. Endpoints are listed in the API Reference table above.

Create an Analytic Template

POST /mop/createAnalyticTemplate
{
  "name": "Interface_Change_Validation",
  "os": "cisco-ios",
  "passRule": true,
  "prepostCommands": [
    {
      "preRawCommand": "show interface GigabitEthernet0/1",
      "postRawCommand": "show interface GigabitEthernet0/1",
      "passRule": true,
      "rules": [
        {
          "type": "matches",
          "preRegex": "/line protocol is (\\w+)/",
          "postRegex": "/line protocol is (\\w+)/",
          "evaluator": "="
        }
      ]
    }
  ]
}

Structure

  • name – template name
  • os – target OS
  • passRule – true = ALL prepostCommands must pass (AND), false = ONE must pass (OR)
  • prepostCommands[] – array of pre/post command pairs
    • preRawCommand – CLI command to run before the change
    • postRawCommand – CLI command to run after the change
    • passRule – true = ALL rules must pass, false = ONE must pass
    • rules[] – comparison rules
      • type – matches, !matches, regex, or table
      • preRegex – regex to extract value from pre-change output
      • postRegex – regex to extract value from post-change output
      • evaluator – comparison operator: =, !=, <, >, <=, >=, %

Rule Types

Type Purpose
matches Pre and post extracted values must match per evaluation operator
!matches Pre and post extracted values must NOT match
regex Regex-based extraction and comparison
table Table-based comparison of structured output

Running an Analytic Template

In a workflow, use the MOP.runAnalyticsTemplate task:

{
  "incoming": {
    "pre": "$var.preCheckTaskId.mop_template_results",
    "post": "$var.postCheckTaskId.mop_template_results",
    "analytic_template_name": "Interface_Change_Validation",
    "variables": {}
  },
  "outgoing": {
    "analytic_result": null
  }
}

Critical: The pre and post inputs must be the full RunCommandTemplate output object (which contains a commands_results property). Do NOT pass just the commands_results array — pass the entire result object.

Gotcha: Pre and post commands must have exactly 1 match each in the collected results. If 0 or >1 match, it produces an error. The matching compares against both the raw and evaluated command strings — if variables were used, the evaluated string (with variables replaced) is what will match.

Gotchas

  1. Missing variable = skip = PASS (not fail) – if a <!var!> token has no value, the command is silently skipped and counts as PASSED. Verify variables are passed correctly.

  2. case: true = case-INsensitive – confusing naming. "flags": {"case": true} enables case-insensitive matching. It does NOT mean case-sensitive.

  3. Empty rules = auto-pass – a command with no rules ("rules": []) always passes. Add at least one rule if you want validation.

  4. RegEx 5-second timeout – complex regex patterns run in a sandboxed VM with a 5-second limit. Patterns prone to catastrophic backtracking will timeout.

  5. contains does substring matching – "100" matches "1002". For exact matching, use RegEx with multiline flag:

    {"rule": "^<!vlanId!>\\s+", "eval": "RegEx", "severity": "error", "flags": {"multiline": true}}
  6. Eval types are case-sensitive – "RegEx" not "regex" or "REGEX". "#comparison" not "Comparison".

  7. Only “name” is required – template validation uses AJV with strict=false. Minimal templates are accepted.

  8. Update is full replacement – POST /mop/updateTemplate/{mopID} replaces the entire template. Include ALL fields when updating, not just changed ones.

  9. MOP is read-only – command templates run show commands and evaluate output. Never use MOP to push configuration changes. Use Jinja2 templates and workflow adapter tasks for config changes.

  10. _id equals name – the engine sets _id = name on create. They are always identical. Use either for lookups.

  11. Rule-level missing variable ≠ command-level skip – if a command has <!var!> missing, the whole command is skipped (passes). But if a rule has <!var!> missing, it gets eval: "missing_parameters" and returns "Invalid Rule: Missing Parameters" with result: false. The rule fails, not skips.

  12. Template name change on update = delete + create – if you update with a different name, the engine deletes the old template and creates a new one. This is destructive — the old _id is gone.

  13. Import renames on collision – importTemplate does not fail on duplicate names. It appends (N) to the name (e.g., My_Template becomes My_Template (1)).

  14. Cannot set namespace directly – providing namespace in the create body throws an error. Namespaces are managed through project membership.

Helper Templates

Always start from a helper template when creating assets. Read the helper file first, then modify it.

File API Call Purpose
assets/helpers/create/create-command-template.json POST /mop/createTemplate Command template with rules
assets/helpers/update/update-command-template.json POST /mop/updateTemplate/{mopID} Update template (full replacement)

Developer Scenarios

1. Build a pre-check command template

  1. Identify the show commands needed (e.g., show interface, show vlan brief)
  2. Read assets/helpers/create/create-command-template.json as a starting template
  3. Fill in name, description, add commands with <!variable!> placeholders
  4. Add rules for each command – use contains for simple checks, RegEx for pattern matching
  5. Set passRule at template and command level (AND vs OR logic)
  6. Create with POST /mop/createTemplate
  7. Test standalone with POST /mop/RunCommandTemplate providing variables and devices
  8. Check result (top-level) and commands_results[].rules[].result for pass/fail details

2. Wire RunCommandTemplate into a workflow

After standalone testing passes:

  1. Use /builder-agent to build a workflow
  2. Add a MOP.RunCommandTemplate task to the workflow
  3. Wire incoming variables: template, variables, devices using $var.job.* references
  4. Wire outgoing: capture results in a variable like mop_template_results
  5. Add downstream logic to branch on $var.taskName.result (true/false)
  6. Use /builder-agent to run via POST /operations-manager/jobs/start

3. Build an analytic template for pre/post comparison

  1. Identify the commands to run before and after the change
  2. Create an analytic template with POST /mop/createAnalyticTemplate
  3. Define prepostCommands with pre/post command pairs
  4. Add rules with preRegex/postRegex to extract values for comparison
  5. Set evaluation operator (= to verify values match, != to verify they changed)
  6. In a workflow: run pre-change commands, execute the change, run post-change commands, compare
  7. Remember: pre and post commands must have exactly 1 match each in results